Question: Can I Replace A 2 Amp Fuse With A 5 Amp Fuse?

Can I put a 13a fuse in a 3a?

If it’s a rewireable type plug and the original fuse size fitted by the manufacturer is not known, the recommended method is to use the 700W rule: For an appliance rated as 700W or less, a 3A fuse should be fitted.

For appliances above 700W, a 13A fuse should be fitted..

Can I use a 2 amp fuse instead of 1 amp?

The real answer is NO. The manufacture put a 1 amp fuse in the unit because the typical draw is much less than the 1 amp and the fuse blow will be an indication of trouble coming.

Can I replace a 15 amp fuse with a 20 amp fuse?

The answer: It’s possible, but not advisable without an electrician evaluating the situation. You should never just upgrade from a 15-amp breaker to a 20-amp one just because the current one is tripping. Otherwise, you may burn your house down via electrical fire.

Why does my 15a fuse keep blowing?

The fuse is the incorrect amperage rating Check what devices or lights are on that circuit, as it may be the case that a new amplifier pulls too much power, causing the fuse to blow. The more devices there are on one circuit, the heavier the amp load.

Can I use a 15 amp fuse instead of a 10 amp fuse?

Yes, the 15 Amp fuse may be sized for a device in that particular circuit, and the 10 Amp fuse may be very short lived.

What amp fuse do I need for a TV?

Plugs for appliances rated up to about 700 watts should have a 3-amp fuse (coloured red). For example: 3A Fuse – Table lamp, standard lamp, television, video, computer, mixer, blender, fridge, freezer, power drill, jig saw, soldering iron.

Why does my fuse keep blowing?

There are two conditions that can cause a fuse to blow. First, and most commonly, when too many lights or plug-in appliances draw power from the circuit, it can overload the capacity of the fuse and cause the metal ribbon inside the fuse to melt through.

How many watts can a 5 amp fuse take?

1150 WattsMultiply the voltage by the amps and this will give you the maximum number of Watts you can place on the circuit. If your lighting circuit at home is protected by a typical 5 amp fuse you can multiply this by the voltage to get 1150 Watts.

Can I replace a 10amp fuse with a 13 amp?

If you replaced it with 13A fuse, it will allow current more than 10A, so it may possible that other components may get damage due excessive current flow than specified. If TV components can sustain up to 13 A current, you can replace it.

Does it matter what amp fuse you use?

A smaller fuse may always be used safely in a circuit; however, never use a larger fuse. Of course, if the current exceeds 15 amps, your fuse will blow.

Can I use a 3 amp fuse instead of a 2.5 amp?

3 amp should be fine. the fuse is mainly there to protect from burning wires. you might try Radio Shack – they would have the fuse in a higher voltage rating (usually 250 volt), but that won’t cause a problem.

Can I replace a fuse with a higher amp?

Never replace a blown fuse with a higher-amp fuse. Always replace the fuse with one with the specified amp rating. You may install the next-smaller-rated fuse to get you by in a pinch until you can purchase a replacement.

Can I use a 5 amp fuse instead of a 4 amp?

Registered. I wouldn’t want to put a 5 amp fuse in a circuit that calls for a 4 amp. You would be pushing the safety factor. Try to find a 4 amp.

Is it OK to replace a 3amp fuse with a 5 amp fuse?

If the motor is increased to a 5 amp motor then a 5 amp fuse is ok. You could but you will risk damaging the device it is suppose to protect. Replace with the correct size fuse, if you are having a blown fuse problem you may have a short in the system. … If there is a short either will blow.

What happens if you use the wrong amp fuse?

Fuses are present to protect the components of the electrical system. Rather than destroying the circuit when there is a surge of power, the fuse blows to protect it. … If you use a fuse with the wrong amperage, the fuse won’t blow as intended, damaging the circuit and resulting in a much larger repair bill.

Why does my 15 amp fuse keep blowing?

If the cigarette lighter fuse is 15 amps, then a draw of more than 15 amps will cause it to blow. … And if the problem in your circuit is actually some type of short, putting in a larger fuse may cause the wiring to heat up to the point where it could melt or even cause a fire.

How can you tell if a 13a fuse is blown?

Look at the fuse wire. If there is a visible gap in the wire or a dark or metallic smear inside the glass then the fuse is blown and needs to be replaced.

How much current can a 13 amp fuse take?

BS 1362 Fuse Operation Characteristics In fact a 13A fuse will allow a current of 20A to pass indefinitely without blowing.

Can I put a 10amp fuse in a 5 amp?

Possibly yes. What ever is wired into that 5 amp slot is rated for a max of 5 amps, overdrawing more than 5 amps by removing the 5 amp fuse and putting in a 10 amp fuse can possibly short out a circuit.

Can I use a 30 amp fuse instead of 15?

You MAY be ok with a 30amp in place of the normal 15, but you MAY also burn up some wireing, and/or the whole bike. In any case the work done needs a good going over.