Quick Answer: How Long Do Residential Wells Last?

How often do you need to replace a well?

Once your well has reached its serviceable life (usually at least 20 years), have a licensed or certified water well driller and pump installer decommission the existing well and construct a new well.

For more information visit “Finding a Contractor ” (National Ground Water Association)..

How do you know when you need a new well?

You’re hearing strange sounds – If you’re hearing odd or loud sounds from your plumbing, you need to call us as quickly as possible. These noises are usually a telltale sign that you need water well pump repair or that you may even need to replace your well pump.

How often should a well be cleaned?

every ten yearsWater wells should also be inspected annually for obvious signs of damage or contamination. Be sure the area within 100 feet around the well is clear of debris or items that might pollute the water supply. Get the well professionally inspected by a water well contractor every ten years.

How many years should a well pump last?

8 to 15 yearsDepending on the equipment type and model, well pumps typically last anywhere from 8 to 15 years. However, several factors can contribute to the premature expiration of a well pump.

Are deeper wells better?

2. Water quality in a deep well usually changes more slowly than in a shallow well. That’s because groundwater does some mixing as it moves through the aquifer. A spill a mile away from your deep well in the Basin and Range aquifer might be substantially diluted with clean aquifer water before it gets to your well.

How much does it cost to repair a well?

Obviously, the price of repair depends on the type of problem and how difficult it is to fix. The type of well and the depth of the well impact price, too, as do the company you choose and local labor rates. You could spend anywhere from $200-$1,200. However, most service calls cost closer to $600-$800.

Does a well pump use a lot of electricity?

Well pumps use a huge amount of energy every time they start up. Well pumps should be sized by a professional. It is not uncommon for people to have 3/4 hp pumps installed in their wells equaling 30 minutes of pumping per day or 350 kWh/yr, while a ½ hp pump, which uses only 240 kWh/yr, would be sufficient.

How deep are most residential wells?

100 to 800 feetMost household water wells range from 100 to 800 feet deep, but a few are over 1,000 feet deep.

How much does it cost to run a well pump per month?

At current electrical rate schedules each horsepower costs between $0.10 and $. 20 per hour to run. This means if you have a 5 horsepower pump and it needs to run 5 hours a day to meet your irrigation and household needs you could be spending up to $5 per day or about $150 a month to power your well pump!

Can you drill an existing well deeper?

Well Deepening: Reentering an existing well and drilling to a deeper reservoir. Well deepening is re-drilling into an already existing well in order to find a deeper more productive reservoir. Sometimes a previously unproductive well can be deepened in order to reach a location with higher flow and temperature.

How do you maintain a well system?

Keep hazardous chemicals, such as paint, fertilizer, pesticides and motor oil away from your well. Periodically check the well cover or well cap on top of the casing (well) to ensure it is in good repair. Always maintain proper separation between your well and buildings, waste systems, or chemical storage facilities.

How do you know if your well pump is going bad?

Some of the most common indicators of a faulty well pump and pressure tank include: Fluctuations in water pressure throughout the home. Strange noises or rapid clicking sounds coming from the tank. Spitting faucets.

How long after bleaching Well can I shower?

24 hoursKeep in mind that doing laundry and taking a shower cannot be done for at least 24 hours with a chlorinated well. Waiting a few days to do these is a good idea. We recommend using unscented bleach for this process and using a chlorine test kit from your local supply store.

How long should a residential well pump last?

15 yearsWhen properly taken care of, a submersible well pump can have a long life of up to 15 years, although it can be difficult to know just how old your well pump is if a previous homeowner had it installed. The above-ground jet pumps that are more commonly used with shallow wells have an average life span of 10 years.

What is the average cost to replace a well pump?

Such a service should cost $100 to $120. Meanwhile, prepare for a significant cost if you need a new well pump. It costs about $1,000 to replace and install a pump and related components in a shallow-bored well. For a drilled well, the price may approach $2,000, depending on shaft depth and pump horsepower.

Can I replace my well pump myself?

Because it’s HEAVY! And there are special tools that contractors have to lift the pump from that kind of depth. Look at it this way: Even if you have someone else pull the well, you can do the repair/replace action on your own once it’s out of the ground, and still save money. 😉

Will homeowners insurance cover a well pump?

Well pumps are typically protected by your homeowners insurance policy but will depend on what caused them to stop working. If the issue that causes your well pump to break down is a named peril, you will be protected. If wear and tear or neglect are at fault, your homeowners insurance will not help pay for repairs.

What happens when well pump stops working?

Steps to Take if Your Well Pump Stops Working Sometimes resetting a breaker or replacing a fuse affected by a power surge or brownout can fix this. If the well pump circuit breaker has tripped, the well pump itself may be failing. Partial shorts in the wiring or motor can also cause breakers or fuses to trip or blow.